What defines a grey coated steel adhesive wheel weight sample?
Evaluate a grey coated steel adhesive wheel weight by checking its segment pattern, finish and selected tape, then confirm the sample against the workshop's wheels.
SSWYAUTO lists S-FE-006A as a steel adhesive strip with a gray-coated surface and an alternating segment format. These details define the sample to request, but they do not replace a wheel-specific assessment. A useful review connects the physical item, the adhesive option and the supply record so the approved configuration can be identified again when stock arrives.
Read the strip pattern before evaluating the sample
The listed format is (5g+10g)×4, with a total of 60g for the complete strip. The reference image shows alternating smaller and larger segments. This is a different arrangement from a strip made entirely of equal segments. Keep the complete format in the request rather than using only the total mass, which cannot describe how the supplied item is divided.
Treat the supplied format as an identification detail
The strip specification tells purchasing teams which configuration is being offered. It does not determine the correction required for a particular wheel. That requirement belongs to the applicable wheel balancing process and the service equipment. A sample review should therefore confirm the supplied pattern while leaving measurement, placement and final verification to the trained service team following its equipment instructions.
Separate the item reference from its appearance
A photograph helps the team recognize the grey coated steel adhesive wheel weight, while S-FE-006A provides the item reference. Retain both in the evaluation record. Similar-looking stock may have another segment pattern, tape choice or surface treatment. A receiving check that uses only color can miss a configuration change, so the order should describe the physical details that the sample review actually accepted.
Inspect the finish and backing as separate features
The specification identifies steel and a gray-coated surface. The tape is separately offered as Blue Tape, Norton Tape or 3M Tape. These choices need distinct entries in the sample record. A surface finish cannot establish adhesive suitability, and an adhesive brand name cannot prove coating performance. Record visible condition directly, then request documentation for any numerical or environmental requirement that the order needs.
Make a proportionate visual finish check
Review whether the sample has the expected gray appearance and whether any visible edge damage or uneven coverage needs discussion. A photograph does not establish coating thickness, corrosion performance or a particular service life. If the buyer needs a tested property, the supplier should identify the relevant evidence and test conditions. Keep that request separate from the observation that the supplied sample looks consistent with the listed finish.
Confirm the tape that is being assessed
Specify the exact tape option when requesting the sample. Ask for its applicable handling, surface preparation and storage information rather than assuming that all listed options have identical instructions. The blue backing visible in the reference is useful for identification, but color alone is not a complete adhesive specification. A later switch of tape should be recorded and reviewed against the original requirement.
Connect the review to the workshop wheels
The product-specific introduction refers to passenger cars and light vehicles, alloy wheels and steel rims. The structured application list also names cars, trucks, SUVs and motorcycles. These labels provide contexts for questions, not universal approval. In passenger vehicle service, the buyer should identify the representative rims and available space that the workshop will assess before deciding whether the sample fits its actual jobs.
Keep different service requirements distinct
A commercial vehicle service requirement should not be accepted simply because trucks appear in an application list. Likewise, motorcycle service needs its own rim and equipment assessment. Obtain the relevant dimensional information and adhesive guidance for the intended wheels. Where the team serves several wheel types, retain separate findings instead of assuming that an acceptable result on one wheel applies to every other job.
The page describes keeping the rim surface clean and dry, then pressing the weight from the center toward the edges. These brief notes support a discussion with the supplier, but they are not a complete workshop procedure. The service team needs the instructions applicable to the selected tape, wheel finish and equipment. Sample acceptance should reflect those requirements rather than relying on a generic catalog description.
Build receiving checks around the agreed configuration
Receiving inspection is most useful when it compares a delivery with the reviewed configuration. The product-specific packaging section describes 100 strips per box, clarifying the technical table's 100 PCS wording. State the unit explicitly in the order. A complete strip and an individual segment are different counting units; leaving that distinction unresolved makes an otherwise clear stock specification harder to use.
Use the same evidence dimensions at every stage
Keep the sample request, quotation and receiving record aligned around the item, material, finish, segment pattern, tape and packing unit. The table below separates the source detail from the buyer action. It does not introduce a tolerance or acceptance threshold that the page has not established. Where a dimension or tested property matters, add the supplier-confirmed requirement to the order after it has been reviewed.
| Review factor | Listed detail | Buyer action |
|---|---|---|
| Item reference | S-FE-006A | Match the delivery to the reviewed sample. |
| Body and finish | Steel; Gray Coated | Inspect visible condition and confirm required evidence. |
| Strip format | (5g+10g)×4; 60g | Retain the alternating pattern in the stock description. |
| Tape | Blue Tape / Norton Tape / 3M Tape | Name the chosen option and its applicable guidance. |
| Standard box | 100 strips | Confirm contents when the pack is customized. |
Define changes before the replenishment order
The source lists customization of surface processing, tape selection, labeling and packaging. Tire workshops, service centers and aftermarket distributors can discuss those subjects as part of a supply brief. A requested change should remain linked to the accepted sample. Buyers should ask whether the changed configuration needs another review or supporting information before it becomes the reference for regular replenishment.
A useful brief explains the intended wheels, requested tape and packing needs in plain terms. It also distinguishes a visible sample observation from a property still awaiting evidence. That separation helps the workshop and purchasing team review the same requirement. When evaluating a grey coated steel adhesive wheel weight, the record should make clear what has been assessed, which configuration was supplied and which questions remain open.
- Identify the product and segment pattern in the sample request, keeping the complete strip format visible in the specification.
- Select the adhesive option and obtain the information needed for the actual wheel finishes and workshop conditions.
- Record the sample findings, requested evidence and agreed box contents before using the item as a replenishment reference.
- Review changes to tape, finish or packaging explicitly so the next quotation and delivery stay connected to the accepted configuration.
Frequently Asked Questions
Does the 60g strip prescribe the correction for a wheel?
No. It describes the total mass of the complete listed strip. The correction needed for an individual wheel comes from the applicable service measurement and equipment process. Keep the stock format separate from the workshop's determination of amount and placement.
Can gray appearance alone establish the finish performance?
No. Color is a visible identification detail, while coating thickness or tested performance needs relevant documentation. Inspect the sample condition and ask for evidence covering any property required by the purchase specification. Do not convert a photograph into a numerical acceptance result.
Should every tape option be treated as equivalent?
The product page offers Blue Tape, Norton Tape and 3M Tape separately. It does not establish identical instructions for every option. State the chosen tape in the request and confirm the guidance applicable to the wheel finish and conditions being assessed.
What does the standard box count refer to?
The product-specific packaging section describes 100 strips per box. Use the word strip in purchasing and receiving records. If packaging is customized, confirm the revised contents before applying the standard count to the order or stock-handling plan.
Do the vehicle categories prove individual wheel compatibility?
No. Cars, trucks, SUVs and motorcycles are listed contexts. Actual suitability depends on the specific rim, available space and adhesive configuration. Request relevant dimensions and involve the workshop in assessing a sample under the applicable instructions before approving regular stock.
Request a sample with a clear review brief
Buyers can review S-FE-006A with SSWYAUTO and specify the intended wheel requirement, selected tape and box contents. A defined sample request gives the workshop a configuration to assess and gives purchasing a reference for the next supply discussion.